| Title | Specifications |
|---|---|
| Size | 1.50 Inch ID1.50 Inch ID |
| SKU | S253801S253801 |
| Input Pressure | 60 psi0.41 MPa |
| Radial Load Max | 145 lbs645 N |
| Thrust Load Max | 180 lbs800 N |
| Axial Stiffness | N/AN/A |
| Radial Stiffness | 0.41 lb/μin72 N/μm |
| Flowrate on Shaft | 15.0 - 27.0 SCFH6.49 - 11.67 NLPM |
| Air Gap | 150 micro-inches3.81 microns |
| Thrust Bushing | 1.5008 in +.0002/-.000038.120 +0.005/-0.000 mm |
| Bushing Outside | 2.3 in58 mm |
| Thrust Face | 3.35 in85 mm |
| Thrust Bushing Length | 3.175 in81 mm |
| Thrust Bushing Weight | 12.8 oz363 grams |
| Housing Material/Finish | Aluminum/AnodizedAluminum/Anodized |
| Porous Media Material | CarbonCarbon |
| Recommended Shaft | 1.5000 in -.0004/-.0010 in (g6)38.100 mm -9/-25 μm (g6) |
| Recommended Mounting Bore | 2.375 in +.002/-.00260.33 mm +.05/-.05 |
| Maximum Allowable Pressure Supply | 100 psi0.689 MPa |
| Resolution | InfiniteInfinite |
| Maximum Speed | 164 ft/s50 m/sec |
| Common Shaft Materials | Anodized aluminum, stainless steel, nickel plated steel, ceramics, glassAnodized aluminum, stainless steel, nickel plated steel, ceramics, glass |
50 McDonald Blvd.,
Aston, PA 19014 USA
610.494.6700